Matrix Universal Smart Charger for 6V-12V 8.4V 9.6V NiMh & NiCd Battery Packs w/ Deans Adapter

• Smart Charger (with automatic voltage detection) for NiMh RC and Airsoft battery packs 6V ~ 12V (6~10 cells)
• Universal for any NiMH /NiCd battery packs 6V - 12V (6-10 Cells pack); Worldwide usage with 110-240V AC
• Fast charger with current switch to select either, .9A and 1.8A
• Use pulse and negative pulse technology to avoid battery overheating during fast charging, optimized for battery pack's cycle life
• Safety protection fuse for over current, short circuit & reverse polarity protection
• Certifications: EMC, LVD, FCC, CE, RoHs

A smart charger is highly recommended for anyone still using a wall charger! A wall charger requires 4~5 hours of monitoring and you will never really know if a battery pack is fully charged, or over-charged. This smart charger will peak the battery charge, stop charging when full and provides a green/red led light indications so you never have to do any guess work. Operation Instruction Connect battery pack to output connector and plug AC power source. Make sure battery polarity is connected correctly (Red wire is positive) Charger will detect battery voltage automatically, Red LED will be on during charging When battery is fully charged, current will reduce to trickle charging at 50mA, Green LED will be on Battery will be charged at 0.9A or 1.8A constant current, Approximate Charging time is about 1.5hrs for 3000mAh battery,1hr for 1800mAh battery. The charger is designed for faster charging NiCd and NiMH battery packs from 6 to 12V. Do not charge battery packs with voltage less than 6V or voltage greater than 12V and capacity smaller than 1100mAh. Battery pack must be made by high drain current cell.

• Certifications: EMC, LVD, FCC, CE, RoHs
• Package Includes: Charger, Small Tamiya Female, Large Male Tamiya to Small Female Adapter, Small Female Tamiya to DEANS Adapter
• Compatibility: For 6v-12v Ni-Mh / Ni-Cd Battery Pack
• Input: Input: AC110 - 240V
• Output: 6-12V .9A or 1.8A

Please note: This Charger is for NiCd / NiMh type battery packs. NOT for Li-Polymer, Li-Mn, Li-Ion type battery packs. Charging a lipo battery pack with this charger will cause fire and serious injury. Caution The charger is designed for indoor use only. Do not leave the charger unattended during charging. The Charger should be positioned horizontally and work in well ventilated condition, avoid water and keep away from flammable / explosive goods. Do not cover the charger when charging, ambient temperature shall not be more than 40oC Do not leave batteries charging on flammable surfaces, wood surface or carpet. Cut off the power supply before connecting or disconnecting the charger from batteries. Do not try to disassemble the charger (High voltage inside) Mfg is not responsible for any damage and consequent damage caused by Misuse.