Matrix Full Metal Russian Saiga-12K Airsoft AEG Rifle

• Ultra durable, sturdy full metal construction
• Full metal version 3 gearbox with 8mm bearings
• Precision 6.02mm inner barrel
• Lightweight polymer furniture
• Side-folding full stock with sling mount
• Takes standard AEG AK series magazines
• High capacity magazine included.

This is a replica of the world-famous Saiga-12 rifle. Real Steel Story: The Saiga-12 (/ˈsaɪɡə/) is a shotgun available in a wide range of configurations, patterned after the Kalashnikov series of rifles and named after the Saiga antelope native to Russia. Like the Kalashnikov rifle variants, the real steel Saiga-12 it is a rotating bolt, long-stroke gas piston operated firearm that feeds from a square magazine. All Saiga-12 configurations are recognizable as Kalashnikov-pattern guns by the large lever-safety on the right side of the receiver, the optic mounting rail on the left side of the receiver and the large top-mounted dust cover held in place by the rear of the recoil spring assembly. Saiga firearms are meant for civilian domestic sale in Russia, and export to international markets. Since shotgun shells are nearly twice as wide as 7.62×39mm cartridge, the extraction port in the side of the dust cover had to be increased in size. However, since the bolt had to remain the same length to fit inside the AK-47 sized receiver, the rear section of the bolt is covered by a sliding metal flap that rides on the recoil spring. This allows the gun to be sealed against dirt when the bolt is forward, but the compression of the recoil spring during firing moves the flap rearward to clear the extracted shells. For the likely reason of simplifying production of Izhmash's other Kalashnikov-pattern guns, the Saiga-12 extractor does not rotate, but instead delegates the bolt-locking function to a caliber-neutral lug directly behind the bolt-face. The Saiga-12 incorporates an adjustable two-position gas system, with "standard" and "magnum" settings for firing 2-3/4" and 3"-length shells respectively.[5] This is because firing 3" shells with high power loads such as slugs and buckshot generates so much force that the receiver will be damaged if the full power of the gas system is employed without some sort of recoil buffer. The problem is that making the gun durable with such high power loads would make it more likely to experience a cycle failure with the less powerful 2-3/4" shells and likely not to cycle at all when used with low-powered less lethal ammunition. This would essentially render it a straight-pull mechanism.[4]

• Full Length (Folded / Unfolded): 675mm / 912mm
• Weight: 3020g
• Inner Barrel: 480mm
• Inner Barrel Diameter: 6.02 ±
• 0.01
• Gearbox: Ver.3 / 8mm Bushing Bearing Reinforced
• Magazine Capacity: 420 rounds high-capacity magazine included
• Magazine Compatibility: Most AK Style Magazines
• Battery: 11.1v Small Stick Type Battery Recommended (Wired to Dust Cover w/ Small Tamiya)
• Motor: Short Type
• Firing Mode: Semi / Full Auto, Safe
• Hop-up: Yes, Adjustable
• Package Includes: Rifle, Saiga 12K Style High-cap Magazine, 7.62 Style Mid-cap Magazine